No. 3N088 Dayton® Jet Pump Motor

OPDP, 3-Phase with Base, 3/4 horsepower, 3450/2850 RPM

Uses: Jet pump water systems, centrifugal pumps and other applications that require a NEMA 56C or 56J mounting face.

Enclosure: Open dripproof
Mounting: Horizontal or vertical, shaft down
Ambient: 40°C
Thermal Protection: Auto (except 3-Phase motors have none)

NEMA service factors provide reserve margin for intermittent overloading. Locked shaft end bearings provide maximum thrust capability. Rainshield included for vertical mounting.

NEMA 56C frames have a carbon steel shaft with key.

NEMA 56J frames have a 416 stainless steel shaft 7/16inch-20 UNF-2A RH, threaded 11/16inch from end.

NEMA Frame: 56J, 2.6 - 2.5/1.3 Amps
Rotation (facing shaft): CW/CCW
Volts 60 Hz: 208-220/440. Operable on 50Hz, 220/440V at 5/6 of 60Hz HP and speed.
Full-Load Amps: 2.6-2.5/1.3
Service Factor: 1.5
Bearings: Ball
Insulation Class: A